BrdU Proliferatio (Chemiluminescent)

BrdU Proliferation Assay is a completely HTS compatible, non-isotopic, chemiluminescent proliferation enzyme-linked immunosorbent assay (ELISA) assay kit for the detection of bromodeoxyuridine incorporation into newly synthesized DNA of adherent and non-adherent cells.

Features: - Chemiluminescent assay - HTS compatible format - Optional spin step - High sensitivity - Best Signal to Noise ratio available - 4 deg C storage with long shelf life - Non-radioactive - 2 hour protocol - Suitable for all species - Suitable adherent or non-adherent cell types	Performance Summary: - Sensitivity: <10 cells/well - Intra-assay C.V.'s: <10% (spin protocol) - Inter-assay C.V.'s: <10% (spin protocol)
	Ordering Information:
	Cat. No. X1623K1 X1623K2 X1623K3	Size 200 Tests 1000 Tests 5000 Tests
	For larger quantity pricing, please contact Customer Service

Protocol Summary: Not to be used in place of detailed protocol:

1. Cell Plating – no Test Reagent/Drug (skip step 3 below)	• Seed cells at 1-2 x 105 cells/ml, 100 ml/well
2. Cell Plating – withTest Reagent/Drug (see below step 3)	• Seed cells at 0.5-4 x 105 cells/ml, 50 ml/well
3. Addition of Test Reagent(s)/Drug	• Add 50 ml/well, 2X concentration desired
4. Addition of BrdU	• Dilute 500X stock BrdU, add 20 ml/well (be sure to include a No BrdU control)
5. Incubate	• 2-24 hours
6. Fix and Denature - Adherent Cells	• Aspirate (or flick) the media from the cell wells • Add 200 ml/well Fixing Solution • Incubate 30 minutes at Room Temp. • Aspirate the Fixing Solution and blot the plates dry.
- Suspension Cells No-Spin Procedure	• Add 200 ml/well Fixing Solution on top of the cells. • Incubate 1 hour at Room Temp • Aspirate the Fixing Solution and blot the plates dry.
- Suspension Cells Spine Procedure	• Spin the plates for 5 minutes at 1000 rpm. • Aspirate media, add 200 ml/well Fixing Solution. • Incubate for 30 minutes, room temp. • Aspirate the Fixing Solution and blot the plates dry.
7. Wash Step	• Wash X3 with 1X wash buffer and blot dry.
8. Detector Antibody	• Add 100 ml/well of diluted detector antibody.
9. Incubate	• 1 hour at room temp.
10. Wash Step	• Wash X3 with 1X wash buffer and blot dry.
11. Conjugate Addition	• Add 100 ml/well HRP-conjugate
12. Incubate	• Incubate for 30 minutes at room temperature.
13. Wash Step and Final Water Wash	• Wash as above. Perform a final distilled water wash by flooding the entire plate with distilled water. Pat dry on absorbent paper towels.
14. Development	• Add 100 ml/well chemiluminescent substrate
15. Read	• Read immediately (reaction may be read for up to 30 minutes).